English
创建于05.25
Milling machine
Introduction to This Machine
The GMMA-100L automatic walking edge milling machine automatically performs milling during the processing of bevels, reduces usage cost and reduces labor intensity; Cold cutting operation is adopted, and the surface of the processed bevel is free of oxidation. The surface finish of the groove reaches Ra3.2-6.3, fully meeting the requirements of the welding industry, and can be welded immediately without deburring treatment; This product is pollution-free and easier to operate
2. Application fields
+ Can be used in the processing of steel, ferrochrome, fine-grained steel, aluminium products, copper and aluminium alloys.
+ Can be machined into "K", "V", "X", "J", "U" or "Y" type bevels.
+ Can be used for beveling operations in construction machinery, steel structures, pressure vessels, shipyards, aerospace industries.
3. Flatbed
Projects | Description |
Machined plate size | Thickness 8mm-100mm (minimum limit 6mm) |
Process the bevel Angle | Adjust the Angle freely from 0 to 90 degrees |
Process slope width/depth | Single time * maximum 30mm multiple times * maximum slope width 100mm |
Finish the machined surface | Ra: 3.2-6.3 |
GMMA-100K type automatic flat edge milling machine /K type beveling machine Product introduction:
The operation mode of processing bevels with the upper and lower spindles simultaneously completes the K/X bevel in one feed, and the operation of processing bevels with the upper and lower spindles simultaneously achieves twice the result with half the effort. The upper bevel Angle is 0 to 90 degrees, the lower bevel Angle is 0 to 45 degrees, with stepless adjustment. Slope finish Ra3.2-6.3
GMMA-100K edge-milling machine/automatic walking edge-milling machine product power parameters:
Power supply voltage: AC380V 50HZ
Total power: 6520W
Cutting energy consumption: 6400W
Spindle speed: 500-1050r/min
Feed rate: 0-1500mm/min (depending on material and feed depth)
Processing performance parameters of GMMA-100K edge-milling machine/automatic walking edge-milling machine product:
Clamping plate thickness: 6-100mm
Clamping plate width: ≥100mm (non-machined edge)
Machined plate length: ≥400mm
Single bevel Angle: 0-20mm (depending on the bevel Angle and material)
Top groove Angle: 0° to 90° Adjustable
Downhill slope Angle: 0° to -45°Adjustable
Uphill slope width: 0-60mm (depending on the Angle of the slope)
Slope width: 0-45mm (depending on the Angle of the slope)
Cutter head diameter: 2*φ63mm
Number of blades: 2*6pcs
Workbench height: 810-870mm
Walking footprint: 800*800mm
Net weight: 395kg
Gross weight: 460kg
Pack size: 950*1180*1430mm